Vizio E320VP - Manual (Page 10)

VIZIO E320VP User Manual
10
www.VIZIO.com
Chapter 1 Setting Up Your HDTV
Finding a Location for Your HDTV
 The power consumption of your HDTV is about <51.5W (Avg).
o
Use the included power cord.
o
When an extension cord is required, use one with the correct power rating. The 3-pronged
cord must be grounded and the grounding feature (3 rd prong) must not be compromised.
 Install your HDTV on a flat surface to avoid tipping.
 For proper ventilation, you must allow space between the back of your HDTV and the wall.
 Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the
service life of the electronic components.
 Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent
poor ventilation and excessive component damage.
 If you want to mount your HDTV on the wall, see below for additional information.
 Read this user manual carefully before installing your HDTV.
VIZIO offers professional installation services including home networking. Contact VIZIO for more
information on these services at 877-MYVIZIO (877-698-4946) or www.VIZIO.com.
Attaching the TV Stand
Note: We strongly recommend that two people perform the setup and assembly due to the weight and
size of the TV.
Unpack the TV and stand base
1. Remove the two top foam end caps.
2. Remove the stand base and accessory box from packaging.
3. Remove the TV from the box and lay it face down on a clean, padded, flat surface.
Note: Make sure that the surface is free of debris to prevent the TV screen from getting scratched.
Attach the TV stand base
1. Align the stand base to the stand neck already attached to the TV.
2. Slide the base on and tighten the thumb screw to secure.