Chapter 3 vizio remote control, Installing the batteries, Remote control range – Vizio E320VP User Manual

Page 14: Vizio remote control precautions

Advertising
background image

VIZIO E320VP User Manual

14

www.VIZIO.com

Chapter 3 VIZIO Remote Control

Installing the Batteries

1. Remove the battery cover.
2. Insert two AA batteries into the remote control. Make sure that

you match the (+) and (-) symbols on the batteries with the (+)
and (-) symbols inside the battery compartment

3. Replace the battery cover.


Precautionary Tips for Inserting the Batteries:

 Only use AA batteries.
 Do not mix new and old batteries. This may result in cracking or leakage that may cause a fire or

lead to personal injury.

 Inserting the batteries incorrectly may also result in cracking or leakage that may cause a fire or

lead to personal injury.

 Dispose of batteries according to local hazardous waste regulations.
 Keep the batteries away from children and pets.

Remote Control Range

 Point the remote control directly at this sensor for the

best response to the remote signal.

 Do not place any obstacles between the remote control

and the remote control sensor.

 The effective range of the remote control is

approximately 22 feet (7 meters) from the front of the
remote control sensor, 30° to the left and right, 20° up
and down.

VIZIO Remote Control Precautions

 The remote control should be kept dry and away from heat sources. Avoid humidity.
 If your HDTV responds erratically to the remote control or does not respond at all, check the

batteries. If the batteries are low or exhausted, replace them with fresh batteries.

 When not using the remote control for a long period of time, remove the batteries.
 Do not take the batteries apart, heat them, or throw them into a fire.
 Do not subject the remote control to undue physical stress, such as striking or dropping it.
 Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.

Advertising