Vizio E320VP - Manual (Page 15)

VIZIO E320VP User Manual
Version 6/15/2010 15
www.VIZIO.com
Remote Control Buttons
POWER ( )—Press to turn the TV on from the Standby mode. Press it
again to return to the Standby mode.
CEC-Supported Buttons:
CEC needs to be set up and enabled for these buttons to work. See CEC on
page 39 for more information.
● (Record)—Press to begin recording on your CEC-supported device.
(Pause)—Press to pause playback on your CEC-supported device.
► (Play)—Press to start Playback on your CEC-supported device.
■ (Stop)—Press to stop playback/recording on your CEC-supported
device.
(Previous)—Press to skip the previous track on your CEC-
supported device.
(Reverse)—Press to reverses playback on your CEC-supported
device.
(Fast Forward)—Press to fast forward playback on your CEC-
supported device.
(Next)—Press to skip to the next chapter on your CEC-supported
device.
EXIT—Press to exit from open menus.
MENU—Press to open the On-Screen Display (OSD) menu.
OK—Press this button to display the Channel List. Press to confirm
selections for On-Screen Display (OSD) menus.
Silver Diamond (represented by ▲▼◄ ► in the manual instructions)—
Pressing up, down, left, or right on the points of the diamond are used to
navigate the OSD menu. They will also be used as value settings when the
slide bar is shown on the screen and option settings to turn a feature off or on.
BACK—Press to return to a previous OSD menu.
GUIDE—Press to display detailed program information when viewing a digital
TV program.
Color Buttons (Yellow, Blue, Red, & Green)—These buttons currently do
not operate any functions on your HDTV.
VOL +/- —Press to turn the volume up or down.
MEDIA – Use this button to access the USB drive to view your pictures.
MUTE—Press to turn the sound on and off.
LAST— Press to recall the previously viewed channel.
CH +/- —Press to change the channels up or down
HDMI—Press to select the HDMI input. Press repeatedly to cycle between both HDMI inputs.
AV—Press to select the AV input.
TV—Press to select the TV input.
Number Button Pad—Press to select a channel or enter a password.
INPUT—Press to cycle through the various devices connected to your TV (called Inputs). The inputs
cycle in the following sequence: TV, Comp/AV, HDMI-1, HDMI-2, RGB, and Media. After you have
stepped through the entire sequence, you will return to the beginning.
- (DASH)—Press to insert a dash between the main and sub-channels. For example, channel 28-2 would
be selected by the button sequence 2, 8, DASH, 2.