Wayne-Dalton 3014 User Manual

Photoelectric safety sensors, Installation instructions and owner’s manual, Important notice

Advertising
background image

Wayne-Dalton Corp.

P.O. Box 67 Mt. Hope, OH 44660

(888) 827-3667

www.wayne-dalton.com

Opener Models:

Torsion idrive™ models: 3651-372, 3750-372.

Quantum™/Classicdrive™ models: 3012, 3014, 3016, 3018, 3212, 3213, 3214, 3312, 3313, 3314, 3316, 3412, 3414, 3512, 3514.

DoorMaster™ models: BDOR-2000 & BIRW-2000

idrive™ models: 3660-372, 3661-372, 3662-372, 3760-372, 3751-372.

Photoelectric Safety Sensors

Installation Instructions

and Owner’s Manual

© Copyright 2003 Wayne-Dalton Corp.

New 9/4/2003

Important Notice!

DOOR OPENER WILL NOT OPERATE PROPERLY UNTIL PHOTOELECTRIC

SENSORS ARE INSTALLED AND PROPERLY ADJUSTED! DO NOT OPERATE

DOOR OPENER UNTIL IT IS FULLY INSTALLED, ADJUSTED AND YOU ARE

INSTRUCTED TO DO SO!

Photoelectric Sensors

(1) Sender w/Wire: 260600

(1) Receiver w/Wire: 260597

Photoelectric Sensors Hardware: 297218

(2) 5/16 x 1-1/2” Lag Screws

(2) 1” Flat Head Nails

(2) 1/4-20 x 1/2” Carriage Bolts, Washers & Nuts

(2) Wall Mounting Brackets

(2) “U” Brackets

(1) Power Cord Clip (adhesive back)

(1) Jumper

Part No: 306736

WIRES ARE
PRE-ATTACHED

Advertising
This manual is related to the following products: