Whirlwind Satellite Module and Headphone Breakout Box SAT-1 User Manual

Whirlwind Headphones

Advertising
background image

1: Volume Controls
Provides separate left/right
volume control. When used in
conjunction with the
Stereo/Mono switch, you can
achieve a “mix” between
channels.

2: Headphone Outputs
Two outputs are provided for
each of the two sections on the
Satellite module. Each set is
wired in parallel.

3: Stereo/Mono Switches
One switch is supplied for each
section of the SAT-1

4: IN
Input to Satellite Module.
Standard XLR jack is provided
so that hookup can be
accomplished with standard
microphone cables.

5: THRU
Wired parallel to the input jack,
can be used for “Daisy
Chaining” modules.

Optional Equipment: PCHLIP for mounting SAT-1 on a

microphone stand. Available at authorized Whirlwind dealers.

When using headphone impedances of 50 ohms or less, do
not power the SAT-1 with an amplifier rated greater than 45
watts. Failure to observe this will burn out the current limiting
resistors inside the unit and void the warranty.

!

L

R

STEREO

MONO

1

2

PHONES

PHONES

SAT-1

SATELLITE

MODULE

IN

THRU

1

2

3

4

5

99 Ling Rd

Rochester, NY 14612

585 663-8820 Fax 585 865-8930

SAT-1

Satellite Module and

Headphone Breakout Box

XLR PINOUT
Pin 1 = shield
Pin 2 = ring (right)
Pin 3 = tip (left)

Advertising