Walker SB36 User Manual
Owner’s manual, And illustrated parts manual
Advertising
OWNER’S MANUAL
Safety, Assembly, Operating, and Maintenance Instructions
and ILLUSTRATED PARTS MANUAL
Model SB36 Single-Stage Snowblower
Please Read and Save These Instructions
Effective Date: 04-01-99
For Safety, Read All Safety and Operation
P/N 5600-1
Instructions Prior to Operating Machine
Price $5.00
™
Advertising
Table of contents
Document Outline
- MODEL SB36 OWNER’S MANUAL
- Foreward
- Table of Contents
- General Information
- Specifications
- Component Identification
- Safety Instructions
- Assembly Instructions
- SETUP AND INSTALLATION
- Lift Bracket Installation
- Counterweight Spring Hook Tab Locations (bottom view)
- Install Spout Assembly
- Engage Snowblower Mounting Tubes
- Align PTO Shaft and PTO Coupler
- Installing PTO Quick Coupler
- Coupler Ring "Locked" Position
- Attach Lift Chains to Lift Brackets
- Snowblower in UP (Raised) Position
- Snowblower in DOWM (Lowered) Position
- GHS Blower Intake Cover
- PREOPERATING CHECKLIST
- Operating Instructions
- CONTROL IDENTIFICATION, LOCATION, AND FUNCTION
- Tractor Controls
- Lift Handle
- Snowblower Operating Controls
- Foot Trigger
- Spout Position Control Handle
- Deflector Position Control Handle
- STARTING THE MACHINE
- ENGAGING THE SNOWBLOWER
- PTO Clutch Engaged (Model MD Shown)
- PTO Clutch Disengaged (Model MD Shown)
- STOPPING THE MACHINE
- RECOMMENDATIONS FOR SNOWBLOWING
- REMOVING SNOW
- Throw Snow to One Side
- Throw Snow to Both Sides
- CLOGGING CHECKLIST
- Operator’s Notes
- Maintenance Instructions
- LUBRICATION
- Grease Fitting and Oil Point Lubrication
- PTO U-Joint
- Gearbox Lubrication
- Snowblower with Gearbox Cover Removed
- Drive Chain Lubrication
- Remove Chain Guard Cover
- Snowblower Lubrication Points
- Snowblower Lubrication Points
- REPLACING/REPAIRING
- Gearbox Replacement
- Replace Gearbox
- Drive Chain
- Loosen Chain Tension
- Remove Master Link
- Proper Master Link Clip Installation
- Sprockets
- Sprocket Wear
- Drive Shaft Sprocket Replacement
- Remove and Replace Sprocket
- Align Sprockets
- Check Sprocket Alignment with Chain Installed
- Auger Sprocket Replacement
- Auger Components
- Scraper Blade
- Flexible Coupling Spider
- U-Joint Shear Pin (After S/N 99-1042)
- PTO Shear Pin
- ADJUSTMENTS
- Drive Chain Tension
- Loosen Chain Tension Block Mounting Bolt
- Proper Chain Tension
- Gauge Wheels or Skid Shoes
- Adjust Gauge Wheels
- Adjust Skid Shoes
- Removal and Storage Instructions
- MAIN BODY COMPONENTS
- AUGER AND DRIVETRAIN COMPONENTS
- KEY TO ABBREVIATIONS USED IN ILLUSTRATED PARTS LIST
- LIMITED WARRANTY