Wayne-Dalton TORQUEMASTER 3663-372 User Manual
Page 21
Advertising
14
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
6ft
Mounting Disconnect
Handle Bracket
Mark a location on the right jamb, 6 feet
above the floor to mount the disconnect
handle bracket.
Pilot drill lag screw location using
1/8" drill bit.
Align top of the bracket with the mark.
Fasten bracket to the jamb with
(2) 1/4” x 1-1/2" lag screws.
1/4” x 1-1/2”
Lag Screws
Disconnect
Handle Bracket
Tools Needed:
Pencil
Tape Measure
Power Drill
1/8" Drill Bit
7/16” Socket
Driver
7
IDRIVE
®
FOR TORQUEMASTER
®
INST
ALLA
TION
Advertising