Waves Parametric Convolution Reverb IR-L - Manual (Page 33)

IR-360 Controls:
These Controls are exclusive to the IR-360:
F
RONT /R EAR B ALANCE : Range: Front to Rear; Default 50.0
The Front/Rear Balance control determines how much of the reverb is going to the front
vs. the rear speakers. For instance, if the control is set to 65, then 65% of the Reverb
will be put in the front speakers and 35% will be put in the rear speakers.
P
RE -D ELAY O FFSET : Range: 0 to 80ms; Default: 0
This control adds a time delay to the reverb on the rear speakers. It can create an
effect similar to that of a digital delay plug-in.
O
UTPUT
M
ETERS
V
IEW
: Range: -30 to 0 dB
These meters show how much total signal (combined wet and dry) is going into each
surround channel.
Toolbar WaveSystem Controls
There is a view of the Toolbar WaveSystem Controls on the following page:
Waves IR-1 software guide page 33 of 40