Samsung SCX-8030ND - Manual (Page 28)

Setting up the hardware_ 28
2. Open the right door.
3. Remove the new imaging units from its package.
Do not use sharp objects, such as a knife or scissors, to open the imaging unit package. You could damage the
surface of the imaging unit.
4. Pull out the OPC protecting pad.
If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into
fabric.
• Be careful not to scratch the surface of the imaging unit.
• To prevent damage, do not expose the imaging unit to light for more than a few minutes. Cover it with a
piece of paper to protect it if necessary.
scx_8040_install_english.book Page 28 Monday, August 30, 2010 4:23 PM