Watlow Electric RUI/Gateway - Manual

RUI/Gateway & Modbus ® TCP
Configuration & Programming Example
Using KEPServerEX 4.0
Watlow
1241 Bundy Blvd
Winona, MN 55987
Telephone: 507-494-5656
© 2008 Watlow Electric Mfg Co 1
FM 4/08
Configuring the EZ-ZONE
®
RUI/Gateway
1.
This White Paper is not meant to be an exhaustive step-by-step discussion in configuring the
RUI/Gateway, for this work has already been done in two other published EZ-ZONE
®
user
manuals. For instance, if needing assistance in setting the RUI/Gateway IP (Internet Protocol)
address or if you are simply looking for general information pertaining to Modbus
®
TCP as it is
used with EZ-ZONE
®
controls point your internet browser to the Watlow website
( http://www.watlow.com ) and download the EZ-ZONE
®
PM Communications user manual and
or the EZ-ZONE
®
RUI/Gateway user manual.
2. Prior to looking closer at the RUI/Gateway configuration prompts let’s first take a look at the
network in use.