Yamaha DV-S5950 - Manual (Page 32)

28 En
Setup Menu
3 Select an item, and then press
ENTER/OK to confirm your selection.
The relationship between the setting of
this unit and the TV display
When the aspect ratio of your TV is 4:3:
When the aspect ratio of your TV is 16:9
(widescreen):
*1: If the disc is not assigned to playback
with panscan, it is played with
letterbox.
*2: The side of the picture may be
stretched depending on the TV. In this
case, check the screen size and aspect
ratio of your TV.
Progressive
This feature is only valid if you have
connected this unit to a progressive scan
TV through the component video jacks
(see “Component video jacks <A>” on
page 8).
1 In “VIDEO SETUP PAGE”, press 3 / 4
to highlight [PROGRESSIVE], and then
press 2.
OFF
Select this to disable the progressive scan
function.
ON
Select this to enable the progressive scan
function.
2 Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Notes on activating progressive scan:
– Ensure that your TV is equipped with
progressive scan.
– Connect using a component video
cable.
– When making HDMI connections, you
cannot select [PROGRESSIVE].
Setting
Playback
disc
TV display
4:3 PAN
SCAN
4:3 LETTER
BOX
16:9
4:3
16:9
4:3
* 1
16:9
16:9
4:3
Setting
Playback
disc
TV display
* 2
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION
TO THE “STANDARD DEFINITION” OUTPUT. IF
THERE ARE QUESTIONS REGARDING OUR
VIDEO MONITOR COMPATIBILITY WITH THIS
MODEL 525P AND 625P DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
This unit is compatible with the complete line of
YAMAHA products, including the projectors
DPX-1300, DPX-830 and the plasma monitor
PDM-4220.
TIPS: To return to the previous menu, press 1.
To clear the menu, press
SETUP .
00EN_DV-S5950_U.book Page 28 Monday, June 12, 2006 4:42 PM