Yamaha RX-N600D - Manual (Page 7)

CONTROLS AND FUNCTIONS
5
En
INTR
ODUCTION
8 TUNING MODE (AUTO/MAN’L), DISPLAY
• Switches between automatic tuning (the AUTO
indicator is turned on) and manual tuning (the AUTO
indicator is turned off) when this unit is in the FM/AM
tuning mode (see page 46).
• Displays various information about the DAB service
currently being broadcast when this unit is in the DAB
tuning mode (see page 63).
9 ZONE 2 ON/OFF
Turns on Zone 2 or sets it to the standby mode
(see page 102).
This button is operational only when MASTER ON/OFF is
pressed inward to the ON position.
0 ZONE CONTROL
Switches the zone you want to control between the main
zone and Zone 2 (see page 102).
y
When Zone 2 is selected, the ZONE2 indicator flashes in the front
panel display for approximately 5 seconds. While the indicator is
flashing, perform the desired operation.
A VOLUME
Controls the output level of all audio channels.
y
This does not affect the AUDIO OUT (REC) level.
B PHONES (SILENT CINEMA) jack
Outputs audio signals for private listening with
headphones (see page 34).
• When you connect headphones, no signals are output at the
SUBWOOFER OUTPUT jack or the speaker terminals.
• All Dolby Digital and DTS audio signals are mixed down to the
left and right headphone channels.
C SPEAKERS A/B
Turns on or off the set of front speakers connected to the
FRONT A and/or B terminals on the rear panel each time
the corresponding button is pressed.
D PRESET/TUNING, EDIT, SEARCH MODE
• Switches the function of PRESET/TUNING l / h
between selecting preset station numbers and selecting
the tuning frequency when this unit is in the FM/AM
tuning mode.
• Edits the assignments of preset stations when this unit
is in the FM/AM tuning mode (see page 51).
• Switches between the five DAB tuning methods when
this unit is in the DAB tuning mode (see page 59).
E STRAIGHT (EFFECT)
Turns the sound field programs off or on. When the
“STRAIGHT” mode is selected, 2-channel or multi-
channel input signals are output directly from their
respective speakers without effect processing (see
page 39).
F FM/AM, DAB
Switches the reception band between FM, AM and DAB
when “TUNER” is selected as the input source
(see pages 46 and 58).
G PROGRAM selector
Selects sound field programs or adjusts the bass/treble
balance in conjunction with TONE CONTROL
(see page 33).
H TONE CONTROL
Adjusts the bass/treble balance of the front left and right
speakers in conjunction with the PROGRAM selector
(see page 33).
I INPUT MODE
Selects either digital or analog input signals exclusively or
sets this unit to automatically detect the type of input
signals and select the corresponding input signals when
one component is connected via both digital and analog
connections (see page 35).
J INPUT selector
Selects the desired input source.
K MULTI CH INPUT
Selects the component connected to the MULTI CH
INPUT jacks as the input source (see page 38).
The input source connected to the MULTI CH INPUT jacks takes
priority over the source selected with the INPUT selector on the
front panel (or the input selector buttons on the remote control).
L VIDEO AUX jacks
Input audio and video signals from a portable external
source such as a game console, a video camera or a
portable audio player (see page 23).
y
To reproduce the source signals input at these jacks, select
“V-AUX” as the input source.
The audio signals input at the DOCK terminal on the rear panel
take priority over the ones input at the VIDEO AUX jacks.
M USB port
Use to connect a USB memory device or a USB portable
audio player (see page 110).
Note
Notes
Note
Note