Yamaha RX-N600D - Manual (Page 90)

88
En
SET MENU
■ Input mode
B)INPUT MODE
Use this feature to set this unit to reset “INPUT MODE”
back to “AUTO” (see page 35) regardless of the previous
setting or to recall the last input mode (“AUTO”, “DTS”,
or “ANALOG”) used for that source whenever you turn on
this unit.
Choices: AUTO, LAST
• Select “AUTO” to reset “INPUT MODE” back to
“AUTO” (see page 35) regardless of the previous
setting whenever you turn on this unit. This unit
automatically selects input signals in the following
order:
(1) Digital signals
(2) Analog signals
• Select “LAST” to set this unit to automatically recall
the last input mode (“AUTO”, “DTS”, or “ANALOG”)
used for that source whenever you turn on this unit.
■ Input rename
C)INPUT RENAME
Use this feature to change the name of the input source
that appears in the OSD and in the front panel display.
1
Press one of the input selector buttons on
the remote control to select the input source
you want to change the name of.
2
Press j / i on the remote control to place the
“_” (underscore) under the space or the
character you want to edit.
3
Press u / d to select the character you want
to use and then press j / i to move to the
next space.
• You can use up to 8 characters for each input.
• Press d to change the character in the following order, or
press u to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#,
*, +, –, etc.)
4
Repeat steps 1 through 3 to rename each
input source.
5
Press ENTER on the remote control to exit
from “INPUT RENAME”.
>AUTO LAST
[<]/[>]:Select
[ENTER]:Return
B)INPUT MODE
DVD -> DVD
[<]/[>]:Position
[ ]/[ ]:Chara.
C)INPUT RENAME
p
p
CD
MULTI CH IN
SLEEP
CD-R
DVD DTV
MD
DOCK USB
CBL
NET
TUNER
V-AUX DVR
Notes
A/B/C/D/E
ENTER
PRESET/CH
A/B/C/D/E
ENTER
PRESET/CH
A/B/C/D/E
ENTER
PRESET/CH
A/B/C/D/E
ENTER
PRESET/CH