Yamaha PJP-50R - Manual (Page 15)

Preparation Procedure
10
■ Telephone circuit: Setting the telephone
circuit type
To have communications through the telephone circuit, it
is necessary to set the type of the connected telephone
circuit.
1
Press repeatedly until the initial display
appears.
2
Press .
The menu screen appears.
3
Press or to select “Settings”, and then
press .
The “Settings” menu appears.
4
Press or to select “Phone”, and
press .
The “Phone” menu appears.
5
Press or to select “Dial Type”, and
press .
The “Dial Type” menu appears.
6
Press or to select the type of your
telephone circuit, and press
.
• 20PPS (Default): Select when your telephone
circuit is a pulse (20 pps) line.
• 10PPS: Select when your telephone circuit is a
pulse (10 pps) line.
• Pb: Select when your telephone circuit is a tone
line.
y
• In general, “20PPS” is applicable to most telephone
circuits.
• If you do not know the type of your telephone circuit,
consult your telephone company.
7
Press repeatedly until the initial display
appears.
3. Online
2. Call History
1. Settings
Menu
3. Sound Settings
2. Phone
1. Network Settings
Settings
3. Line Echo Cancel
2. Hooking Time
1. Dial Type
Phone
3. Pb
2. 10PPS
1. 20PPS
Dial Type