Yamaha PJP-50R - Manual (Page 21)

16
Setting the Menu List
■ Setting the country using the telephone
function
This function switches the detected telephone circuit
frequency according to the selection of the country where
this system is used. One of the following countries can be
selected.
•
Canada
• China
• Germany
• Japan
• United Kingdom
• United States
• Other
Using the keys on this unit
In the initial display, select “Menu”
→ “Settings” →
“Phone”
→ “Country Code”.
Using the Web menu
In the Web menu, select “Country Code”.
■ Selecting the audio pickup area
(microphone mode)
You can select the audio pickup area of the microphone
during a call.
• Zone (Default): Pick up the audio from a large area.
This mode is suitable for a relatively quiet
environment. This mode is indicated by on the
initial display.
• Spot: Fix the audio pick up area to the front of the
microphone by narrowing the directivity. This mode is
suitable when the number of talkers is limited to one or
two, or when there is equipment that produces noise
such as a projector nearby.
To specify the audio pick up area, use the numeric keys
in the “Microphone Mode” menu. When a key is
pressed, the areas in the direction of the pressed key
and the opposite direction is enabled or disabled. The
following illustration shows the areas enabled by
pressing .
Microphone indicators (blue LED) of which direction
audio can be picked up from all light up. This mode is
indicated by on the initial display.
y
Each pair of areas should be positioned in opposite
directions (i.e. pairs of 1 and 9, 2 and 8, 3 and 7, and/or 4
and 6).
1 2 3 4 5 6 7 8 9 0 MIC MUTE VOL
Configuring the sound settings
MIC MUTE
VOL
4 7 0 8 5 2 6 3
9 # 1
/STANDBY HOOK
2
MIC MUTE VOL
4 7 0 8 5 2 6 3
9 # 1
HOOK
1
2
3
6
9
8
7
4
/STANDBY