Yamaha POCKETRAK 2G - Manual (Page 26)

Using timers
26
POCKETRAK 2G Reference Manual
Setting the recording timer
Make sure that the battery power is sufficient before you set the recording timer.
You can set the unit to make a recording of a specified duration that will start automatically at a
designated time. The recorded file will be created in the designated folder.
1.
While the unit is stopped, press the MENU/STOP button for at least two (2)
seconds.
2.
Press the Y or T button to select “COMMON”, then press the W button.
3. Press the Y or T button to select “TIMER & ALARM”,
then press the W button.
4.
Press the Y or T button to select “TIMER REC”, then
press the W button.
The unit displays the record start time. The hour digits are
highlighted.
Note:
· If you want to cancel the recording timer, select “CANCEL” instead, then press the
W button.
5.
Press the Y or T button to specify the hour, then press the W button.
The minute digits are highlighted.
6. Press the Y or T button to specify the minute, then press the W button.
7.
Press the Y or T button to select the desired recording
duration (30m, 1h, 2h or MAX), then press the W button.
Timer recording time (approx.):
8.
Press the Y or T button to select the desired recording
folder, then press the W button.
30m: 30 min
1h: 60 min.
2h: 120 min.
MAX: Recording will continue until you press the
MENU/STOP button or until the available
recording time is used up.