Yamaha MT4X User Manual

Page 29

Advertising
background image

27

Recording Functions

User’s Guide

Using the REC/PAUSE key and the PLAY key

1)

Connect the input source, set the input select key, and adjust the GAIN control and channel fader so
that the mixer setting is identical to the previous recording.

2)

Press the REC SELECT key for the track you want to punch-in.

The REC SELECT - TRACK indicator on the display will flash.

3)

Press the PLAY key.

The indicator above the key lights and the MT4X starts the tape. Get ready to play the punch-in part.

4)

At the punch-in location, press the REC/PAUSE key.

The indicator above the key lights and the flashing REC SELECT - TRACK indicator will be
illuminated. Play the punch-in part.

5)

Press the PLAY key at the punch-out location.

The indicator above the REC/PAUSE key switches off and the REC SELECT - TRACK indicator
resumes flashing.

You could also use the STOP key or the RETURN TO ZERO key at this point.

Note:

When you perform a punch-in/out recording, you need to find a blank section of about 1 second for your

punch-in and punch-out locations. This is because of the gap between the erase head and record/playback head.
Otherwise you may find that you have accidentally erased material that was before or after the re-recorded segment.

Note:

You can practice the punch-in at this point with the rehearsal function. Press the REHE key instead

of the REC/PAUSE key.

Blank space

Blank space

Punch-in

point

Punch-out
point

Segment to be

re-recorded

Track to be
re-recorded

REC/PAUSE

PLAY

PLAY

STOP

Advertising