Select a display language – Zebra S4M User Manual

Page 65

Advertising
background image

59

Configuration

Select a Display Language

10/21/05

S4M User Guide

13290L-001 Rev. A

Select a Display Language

The

LANGUAGE

parameter is included in password level 3 and level 4 so you can easily reach

the parameter to select a familiar language if you cannot read the one being displayed.

To change the language displayed, complete these steps:

1.

On the control panel, press

MENU

.

The printer enters Setup mode.

2.

Press the left arrow.
If a password is set for level 3 or 4, the printer displays

ADVANCED SETUP

with the

level number, and the

ENTER

button is enabled. If no passwords are set for level 3 or 4,

the printer displays

LANGUAGE

.

3.

What does the printer display?

4.

Use the up and down arrows until you reach the language of your choice.

5.

Press

MENU

.

The printer prompts you to accept changes.

6.

Press

ENTER

to accept the language that you selected.

If the printer displays...

Then...

ADVANCED SETUP 1

*

ADVANCED SETUP 2

*

ADVANCED SETUP 3

*

ADVANCED SETUP 4

*

a.

Press

ENTER

.

The printer displays

PASSWORD 0000

*

.

b.

Use the left and right arrows to enter the password
for level 3 or 4.

c.

Press

ENTER

.

The printer displays

LANGUAGE

*

.

LANGUAGE

*

Continue with the next step.

* Displays in the last language selected.

Advertising