Zebra S4M - Manual (Page 99)

93 Troubleshooting
Calibration Problems
10/21/05 S4M User Guide 13290L-001 Rev. A
Calibration Problems
Table 17 identifies problems with calibration, the possible causes, and the recommended
solutions.
Table 17 • Calibration Problems and Solutions
Problem Recommended Solution
Loss of printing registration on
labels.Excessive vertical drift in top-of-form
registration. Ensure that the media guides are properly positioned.
Set the printer for the correct media type (non-continuous or
continuous). See
Set Media Type on page 62 .
Clean the platen roller according to the instructions in Clean
the Printhead and Platen Roller on page 79 .
Auto Calibrate failed. Ensure that media and ribbon are loaded correctly.
Ensure that the sensors are clean and properly positioned.