Yamaha CRW4416S User Manual
Page 18
Advertising
Chapter 2 - Installing the Yamaha CRW4416S Drive
12
10. Tighten the four fastening screws securely.
11. Attach the cover of your computer.
12. Connect the power cable to an AC outlet, and switch on
your computer.
Make sure that the LED located on the panel of the CRW4416S drive is lit.
13. Start up your operating system, and verify that the
CRW4416S is recognized by the operating system.
For the procedure, refer to the manual for your operation system.
14. Install the writing software.
For the installation procedure, refer to the manual for your writing soft-
ware.
ON/
DISC
READ/
WRITE
VOL
Advertising