Yamaha BLASTER YFS200N - Manual (Page 108)

a. Spark plug gap
When installing the spark plug, always clean the
gasket surface and use a new gasket. Wipe off
any grime from the threads and tighten to the
specified torque.
EBU00288
Air filter cleaning
NOTE
There is a check hose at the bottom of the air fil-
ter case. If dust or water collects in this hose,
empty the hose and clean the air filter element
and air filter case.
1. Check hose
1. Remove the seat.
2. Remove the air filter case cover.
8-8
q
Tightening torque:
Spark plug:
25 Nm (2.5 m•kg, 18 ft•lb)
a