Yamaha BLASTER YFS200N - Manual (Page 131)

3. Put a new bulb into position and secure it
in place with the bulb holder.
4. Install the bulb holder cover.
c C
Make sure the bulb holder cover is securely
fitted over the bulb holder and seated
against the reflector.
5. Install the headlight unit assembly.
Adjust the headlight beam if necessary.
POTENTIAL HAZARD
The headlight bulb is hot when it is on and
immediately after it is turned off.
WHAT CAN HAPPEN
You can be burned, or a fire could start if
the bulb touches something flammable.
HOW TO AVOID THE HAZARD
Wait for the bulb to cool before touching
or removing it.
q
WARNING
8-31