Remote authentication setup – Xerox WorkCentre M123 User Manual

Page 9

Advertising
background image


Page 9 of 28

701P42081

Network Scanning:

• The user selects <Network Scanning>

• A login/password popup will be displayed to authenticate users with the Kerberos server.

• User enters the login and password.

• The login and password is passed on to the Kerberos server and if a match is found the user is successfully authenticated.

• Through the templates/repositories, the users will enter a valid login/password for FTP/SMB servers. This may or may not be the user

login/password; rather it is a login/password that is accepted by the FTP/SMB server.

• Public templates are accessible to any user. Private templates require a password that may or may not be different from the Kerberos

password.

Prerequisite

Complete the Network Installation. Refer to Æ General Network Setup
Complete DNS/WINS set up if Host names are provided for the mail servers, rather than IP addresses. Refer to Æ Advanced Network Setup

Remote Authentication Setup


Field Name

Description

Location

Value

Remote Setup login

Enable Remote Authentication

LUI:
System Settings Æ Login setup/Auditron
Administration Æ Remote Login Setup



Default:

ON:

Guest ON:

Remote Server IP
Address or Server
name.

The IP address or the host name
of the Kerberos server.

Note: If server host name is used
instead of the IP address, refer to
Advanced Network Setup for
DNS / WINS settings.




LUI:
System Settings Æ System Settings Æ
Network Settings Æ Remote
Authentication

_____._____._____._____
Ex of the IP address:
192.168.1.2


Ex of the host name:
Ex:<name>..<company>.com

Advertising
This manual is related to the following products: