Yamaha PDM-4210E - Manual (Page 51)

50
OPERATING INSTRUCTIONS (continued)
D / N
A / B
i +
MENU
OK
FREEZE
ZOOM
AV1
RGB1 RGB2
AV2 AV3 AV4
2-4-12
I / II
P+
P-
+ -
D V D
1 2 3
4 5 6
7 8
0
9
When the FREEZE button on the remote control is pressed, the screen transfers into the
freeze mode.
• There are two types of Picture Freeze mode, Split and Strobe. You can select them at the “Freeze Mode”
setting of the Function Menu.
• The Split mode will display 2 pictures from the same source on the screen with one active picture and the
other still.
• The Strobe mode will display 12 pictures with the last picture active, while other 11 windows are still.
• Pressing the FREEZE button again changes the screen back to the normal picture.
• This function is also available from video input mode besides TV mode. Refer to the table for Freeze function
as below:
FREEZE button
Picture Freezing
A B
5
1 2 3 4
5 6 7 8
9 10 11 12
Active
[Split]
[Strobe]
Split Strobe
PAL, SECAM
NTSC3.58/4.43
576i
480i
576p
480p
1080i/50
1080i/60
720p/60
RGB, DVI-PC
( : Available)
FUNCTION MENU
Refer to the page . (In the same way as when the optional video unit is attached)
But 1 item is added and 5 items are deleted.
Selected characters Setup hint
Freeze Mode Split Strobe
This switches the display condition of the FREEZE mode between Split
(2 pictures) and Strobe (12 pictures).
Mode Display Not Available (grayed out)
ID Number Not Available (grayed out)
Inverse Not Available (grayed out)
Standby White Not Available (grayed out)
Gamma Not Available (grayed out)
37
▼
▼