Yamaha PDM-4210E - Manual (Page 53)

52
OPERATING INSTRUCTIONS (continued)
SETUP MENU (continued)
[During VIDEO signal input]
1 item is added to the Menu shown in the page . 39
Selected characters Setup hint
Scart Output TV Monitor
TV:AV4 (Scart) output will be fixed as TV signal output.
Monitor:AV4 (Scart) output can view the same image as displayed on
the main unit. It is possible to monitor only the composite video signal
from AV1, AV2, or AV3 input that is displayed on the screen at the time.
• If Descrambler is set to On, it will be fixed as TV automatically.
▼
▼
Selected characters Setup hint
Auto Tuning
Country (Page1) (Page2) (Page3)
Select the country name using the ▼ ▲ SELECT buttons and press
OK button.
• If some required stations could not be preset using the auto tuning
function, select and preset the required station in the required
position using the manual tuning operation.
Search – – Press the OK button and it starts the auto tuning.
Manual Tuning
Position 1 2 3 •••••• 199 AV00
Set the position number. This also can be set by ▼ ▲ PROGRAM
UP/DOWN buttons.
Search
(C--)
(S--)
(--MHz)
– –
Select the channel entry method. Enter a two digit channel number
(CH), a two digit S-band number, or a 3 digit frequency (MHz).
– –
Use the 0-9 NUMBER buttons to enter a two digit number. If the number
is a standard channel number, the unit begins searching for the channel.
– –
Use the 0-9 NUMBER buttons to enter a two digit number. If the number
is a standard S-band number, the unit begins searching for the channel.
– –
Use the 0-9 NUMBER buttons to enter a three digit number. If the number
is a standard frequency, the unit begins searching for the channel.
Descrambler Off On
Set this to Off normally. If it is set to On, the AV4 (Scart) terminal
operates as TV signal input, and the screen changes to display AV4
(Scart) input signal automatically.
Name
( :a letter)
This is used to input a 5 digit name for a TV station. After fixing the
cursor on the first digit, select a letter by
▼ ▲ SELECT buttons and
move to the next digit by ADJUST button. Press the OK button
again when finished.
• Selectable letters are “0”~`”9”, ”A”~`”Z”, “+”, “–”, ” ”(blank),
”,”(comma) and ”.”(period) .
Sound System
BG I DK
L' L
Select one of 5 different settings for the sound system.
Colour System
Auto PAL SECAM
NTSC3.58 NTSC4.43
Select one of 5 different settings for the colour system.
Skip Off On
If this is set to On, the selected position will be skipped while
selecting positions by PROGRAM UP/DOWN buttons.
This is automatically set to On for non-broadcasting channels.
NR Off On
If this is set to On, it helps to reduce the noise interference visible on
the screen, especially in weaker signal reception areas.
Fine Tuning
Decreasing the frequency
data for the main tuner Increasing the frequency
data for the main tuner.
After completing fine-tuning, press the RETURN button to exit this
mode.
• The variable range is -56 ~ +56.
Sort
(Position list
designated rows)
– –
Move the cursor to the row of the channel you wish to change, and press
the OK button. The display characters change to green. Use the
▼ ▲
SELECT buttons to move the row to the disired location, and press the
OK button when you have finished. Press the RETURN button to exit.
Auto Off Off On
If this is set to On, the power will be turned off when there is no
transmission signal and no operation for about 10 minutes in the TV
mode.
▼
▼
▼