Yamaha MDX-E300 - Manual (Page 15)

13
EnglishEnglish
TITLE DELETE SET
CANCEL ENTER EDIT
CHAR NUMBER
A B C D E F G H I J K L
1 2 3 4
5 6 7 8
9 0 +10 +100
A-B S/F
DISPLAY
POWER
SCROLL
M N O P Q R S T U V W X
Y Z
REC/
PAUSE
SYNC
/ SPACE
M-MARK REC MODE INPUT
RANDOM PROGRAM REPEAT
STANDBY/ON
NATURAL SOUND MINIDISC RECORDER MDX-E300
+ –
INPUT
ANALOG REC LEVEL DIGITAL
MIN MAX
REC/PAUSE
STANDBY/ON
&
1 8
8
*
DELETE/
CANCEL
&
POWER
Note
Please check the copyright laws in your country to
record from records, compact discs, radio, etc.
Recording of copyright material may infringe
copyright laws.
This unit allows you to make recordings from a wide
variety of program sources (both analog and digital).
When recording an analog source (such as an FM
broadcast or cassette) this unit converts the analog signals
to a 44.1 kHz digital signal before recording them onto
the MD.
When recording a digital source, this unit converts the
digital signals to 44.1 kHz for recording onto the MD.
However, if you are recording a 44.1 kHz source signal
(such as a CD) there is no conversion. This unit can
record 32, 44.1 and 48 kHz digital signals.
Preparation
• Press STANDBY/ON (POWER on the remote control)
to turn this unit on.
6
2 7 7
6
M-MARK
SET/ENTER
2
1
Insert an MD.
2
Press INPUT repeatedly to select the input you want
to record.
For Select
ANALOG IN Î ANALOG
DIGITAL OPTICAL 1 IN DIGITAL OPT. 1
DIGITAL OPTICAL 2 IN DIGITAL OPT. 2
* Appears when digital signal is input.
3
If desired, press REC MODE to select the recording
mode (see “Setting the recording mode” on page 15).
4
Locate the point where you want to start recording.
When recording on a blank MD
• Skip this step.
To start recording from the end of a previous
recording
• Press & to set this unit to stop mode.
To record over a previous recording
• Turn the jog dial (or press $ or › on the remote
control) to select a track (recording starts from the
beginning of the deleted track).
5
Start playing the source to be recorded.
• If you do not need to adjust the recording level,
this step is not necessary.
6
Press REC/PAUSE to set this unit to record pause
mode.
• The REC
* indicators light up.
“REC Standby” and the amount of time available
for recording flash alternately in the display.
If you selected a track number (in step 4) to
record over a previous recording
• “OverWrite OK?” appears in the display.
To confirm, press SET/ENTER. This operation will
erase the selected track number (or point) and all
subsequent material.
To cancel, press DELETE/CANCEL (or
&).
Arrow pointed toward
disc insertion slot
Label facing up
ANALOG
DIGITAL
OPT.1
23
COAX.
32
44.1 48
kHz
REPEAT
MONO REC
MANUAL TOC
DISC TRACK
TOTAL
REMAIN
RANDOM
PROGRAM
A-B S F
L
R
dB – 60 30 10 6 4 2 1 0 OVER 00 – – – – – –
Input indicator
(Source) sampling frequency indicators*
RECORDING
3
0105MDXE300(M).13-16.E 02.5.17, 10:54 AM 13