Yamaha 1009MWTO-F0 User Manual

Page 52

Advertising
background image

P

anel Oper

ation and Displa

y

s

Utility Displays

DME64N/DME24N Owner’s Manual

52

Head Amplifier Setup (HA) Page

Provides access to the head amplifier settings. Refer to
“REMOTE Connection” on page 28 for head amplifier
control signal connection.

Internal Head Amplifier (DME24N only)

AD8HR

AD824

HA

Specifies the type of head amplifier to be set up. The
available options are AD8HR, AD824, and Built-in HA
(DME24N only). When the AD8HR and AD824 are
selected, a number indicating the connection order will
also appear.
Edit using the “List Parameters” editing procedure
described on page 38.

WCLK (AD8HR/AD824 only)

Specifies the word clock signal to be used by the head
amplifier(s).

Available settings of the AD8HR are “D OUT A,” “WCLK
IN,” “INT44.1K,” “INT48K,” “INT88.2K,” and “INT96K.”

D OUT A:

Sets the word clock signal at the digital

input as the master clock of the AD8HR.

WCLK IN:

Sets the word clock signal at BNC

connector as the master clock of the AD8HR.

INT44.1K:

Sets the 44.1 kHz internal word clock as

the master clock of the AD8HR.

INT48K:

Sets the 48 kHz internal word clock as the

master clock of the AD8HR.

INT88.2K:

Sets the 88.2 kHz internal word clock as

the master clock of the AD8HR.

INT96K:

Sets the 96 kHz internal word clock as the

master clock of the AD8HR.

Available settings of the AD824 are “SLOT,” “BNC,”
“INT44.1K,” and “INT48K.”

SLOT A:

Sets the word clock signal input via I/O

cards installed in the I/O slots as the master clock
of the AD824.

BNC:

Sets the word clock signal at the BNC

connector as the master clock of the AD824.

INT44.1K:

Sets the 44.1 kHz internal word clock as

the master clock of the AD824.

INT48K:

Sets the 48 kHz internal word clock as the

master clock of the AD824.

Format (AD8HR only)

Displays the 88.2/96 kHz audio signal transfer mode.
The input setting is on the left and the output setting is
on the right.

No Display (default):

44.1/48 kHz audio signal

transfer.

SP (Double Speed):

Allows direct transfer at 88.2

or 96 kHz.

CH (Double Channel):

88.2 or 96 kHz audio is

transferred by using two 44.1/48 kHz channels to
transfer each audio channel of 88.2 and 96 kHz
respectively. The number of audio channels that
can be handled in this mode is half the number of
channels normally handled by the AD8HR.

Gain

Individually sets the gain of each head amplifier channel.
Edit using the “Numeric Parameters” editing procedure
described on page 36.

NOTE

This page will not appear on the ICP1 display.

NOTE

Some scenes include head amplifier settings. In such
cases, the HA page settings will be saved along with the
scene when it is stored.

Advertising