Basic operations – Yamaha RX-V590RDS User Manual

Page 16

Advertising
background image

1

Set to the “

” position.

2

3

Select the desired input source by using the input
selector buttons.

(For video sources, turn the TV/monitor ON.)

* The name of the selected input source will appear in

the display.

4

Select the front speakers to be used.

* If you use two front speaker systems, press both the A and

B switches.

5

Play the source. (For detailed information on the
tuning operation, refer to page 19.)

6

Adjust to the desired output level.

7

If desired, adjust the BASS, TREBLE, BALANCE
controls, etc. (refer to page 18) and use the digital
sound field processor. (Refer to page 29.)

Notes on using the input selector buttons

Note that pressing on each input selector button selects
the source which is connected to the corresponding input
terminals on the rear panel.
* To select the source connected to the VIDEO AUX

terminals on the front panel, press VIDEO AUX.

The selection of TAPE MONITOR cannot be canceled by
pressing another input selector button. To cancel it, press
TAPE MONITOR again.
When you select a button other than TAPE MONITOR,
make sure that TAPE MONITOR is not also selected.

If you select the input selector button for a video source
without canceling the selection of TAPE MONITOR, the
playback result will be the video image from the video
source and the sound from the audio tape.

Once you play a video source, its video image will not be
interrupted even if the input selector button for an audio
source is selected.

To turn off the power

Press the POWER switch again.

16

BASIC OPERATIONS

TO PLAY A SOURCE

SPEAKERS

A

B

ON

OFF

ON

OFF

VIDEO AUX

VCR 2

VCR 1

LD/TV

TAPE

MONITOR

TUNER

CD

PHONO

3

1, 6

2

4

7

7

POWER

Advertising