Yamaha wr450f - Manual (Page 8)

8
4
Remove the spring support.
Install a optional spacer to achieve the right
static sag.
5
Fit the spring support and the top cap. Tighten
the top cap and lock nut to a torque of 20 Nm.
CAUTION!
The piston shaft must bottom in the top cap
before the lock nut is tightened.
Spring
support
Optional
spacers
Adjustment
wheel
Top cap
Spring support
Refit the adjustment wheel.
Tighten the bolt in the top fork crown to 20 Nm
and the lower triple clamp to 10 Nm.
NOTE!
The top nut only have to be tightened by hand
without extending tool.
02428-04 02428-08