Yamaha FJR1300 - Manual (Page 35)

INSTRUMENT AND CONTROL FUNCTIONS
3-14
3
Rebound damping force
To increase the rebound damping
force and thereby harden the rebound
damping, turn the adjusting knob in di-
rection
a . To decrease the rebound
damping force and thereby soften the
rebound damping, turn the adjusting
knob in direction
b .
CI-09E
EAU00315
WARNING
_
This shock absorber contains high-
ly pressurized nitrogen gas. For
proper handling, read and under-
stand the following information be-
fore handling the shock absorber.
The manufacturer cannot be held re-
sponsible for property damage or
personal injury that may result from
improper handling.
● Do not tamper with or attempt to
open the gas cylinder.
● Do not subject the shock ab-
sorber to an open flame or other
high heat sources, otherwise it
may explode due to excessive
gas pressure.
● Do not deform or damage the
gas cylinder in any way, as this
will result in poor damping per-
formance.
● Always have a Yamaha dealer
service the shock absorber.
_
1. Rebound damping force adjusting knob
Minimum (soft) 20 clicks in direction b *
Standard 10 clicks in direction b *
Maximum (hard) 3 clicks in direction b *
* With the adjusting knob fully turned in direction a
E_5jw.book Page 14 Friday, March 30, 2001 2:14 PM