Yamaha FJR1300 - Manual (Page 83)

PERIODIC MAINTENANCE AND MINOR REPAIR
6-32
6
3. Unhook the headlight bulb holder,
and then remove the defective
bulb.
EW000119
WARNING
_
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
_
4. Place a new bulb into position, and
then secure it with the bulb holder.
EC000104
CAUTION:
_
Take care not to damage the follow-
ing parts:
● Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosi-
ty of the bulb, and the bulb life
will be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
● Headlight lens
• Do not affix any type of tinted
film or stickers to the head-
light lens.
• Do not use a headlight bulb of
a wattage higher than speci-
fied.
_
5. Install the bulb cover, and then
connect the coupler.
6. Install the panel.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU04000
Replacing a tail/brake light
bulb
1. Remove the passenger seat. (See
page 3-10 for passenger seat re-
moval and installation procedures.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
3. Remove the defective bulb by
turning it counterclockwise.
4. Insert a new bulb into the socket,
and then turn it clockwise until it
stops.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the passenger seat.
1. Headlight bulb holder 1. Socket
E_5jw.book Page 32 Friday, March 30, 2001 2:14 PM