Yamaha GX-900 - Manual (Page 51)

43
English
Using the built-in timer
DISC 1 DISC 2 DISC 3
DOWN UP
VOLUME
STANDBY/ON
MINIDISC RECORDER
MD TAPE
DIRECTION
YMERSION B.BOOST MUSIC INPUT INPUT
MIN
PRESET/ TUNING/ BAND A/B/C/D/E
DISC CHANGE OPEN / CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
DOLBY NR
HOUR
RANDOM REPEAT TIME
DISPLAY MODE
MD EDIT DELETE PAUSE/ENTER
MD CHARACTER SET
REC/PAUSE
TAPE
3
DISPLAY
Timer recording
1
To make recording onto a tape, follow steps 3–4 of “Basic
recording” on page 21.
To make recording onto an MD, follow steps 2, 3 and 5 of
“Basic recording” on page 30.
2
Tune in to the station you want to record.
3
Follow step 1 of “Timer play” on page 42.
● In step 2 , select “TUNER”, and then press REC/
PAUSE.
* Press TAPE REC/PAUSE for making recording onto a
tape, and press MD REC/PAUSE for making recording
onto an MD. (“REC
> TAPE (or MD)” and the frequency
will flash alternately on the display.)
* Press both TAPE and MD REC/PAUSE for making
recording onto a tape and MD at the same time.
(“REC
> Dual” and the frequency will flash alternately
on the display.)
● In step 3 , set the time when you want to begin
recording.
● In step 4 , set the time when you want to finish
recording.
4
Press TIMER.
This system will be set to the standby mode.
* The STANDBY and TIMER indicators light up.
To cancel the setting of timer recording
Press DISPLAY once or more so that “REC > TAPE (or MD)”
flashes on the display. While “REC > TAPE (or MD)” is flashing,
press TAPE (or MD) REC/PAUSE.
Note
When the timer recording is finished, the timer setting is
automatically canceled. 1
1
A B C D E F G H I J K L M N O
P Q R S T U V W X Y Z /
2
2
3
3
4
4
5
5
6
6
7
7
8
8
R. TIME
C
EDIT
D
+ I0
E
MODE REPEAT RANDOM
SPACE
TUNER
DISC SKIP
POWER SLEEP INPUT VOLUME
9 0
PRESET
TIME
A
PROG
B
CD
/I
YMERSION BASS BOOST MUSIC
INPUT MODE M–MARK SCROLL
TAPE
MD
REC/PAUSE
ENTER DELETE REC/PAUSE
DIRECTION
MD EDIT
3
3
4
3
Sleep timer operation
This system will be set to the standby mode automatically
when the selected sleep time passes.
1
Play the desired sound source.
2
Press SLEEP repeatedly until the desired sleep time
appears on the display. The display will change as
described below.
* The normal display mode will resume about 4 seconds
after the selection is made.
* “SLEEP” will light up on the display.
3
SLEEP
2h00m 1h30m 1h00m 0h30m
OFF SLEEP
(Sleep timer is off.)