Sound field programs, Selecting sound field programs, Front panel operations – Yamaha RX-V2700 User Manual

Page 48: Remote control operations, Fm/am preset/ tuning, Zone 3 r l optical, Zone 2 audio, Silent cinema s video video, Program selector, Amp sound field program selector buttons

Advertising
background image

SOUND FIELD PROGRAMS

46

En

This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from
almost any stereo or multi-channel sound source. This unit is also equipped with a YAMAHA digital sound field
processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.

y

• When you set the “Decoder Mode” parameter in “Input Select” to “Auto”, this unit selects the appropriate digital decoder according to

the input signal.

• The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources.
• The YAMAHA HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in

actual concert halls, music venues, movie theaters, etc. Thus, you may notice variations in the strength of the reflections coming from
the front, back, left and right.

• You can select sound field programs and adjust the parameters by using the GUI screen. See page 79 for details.

• When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.
• Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input

source (see page 43) and Audio input jack select is set to “ANALOG” (see page 42).

• When you play back DSD sources with any sound field program, this unit converts the DSD signals to PCM signals and then applies

the selected program.

• When you play back DTS 96/24 sources with any sound field program, this unit applies the selected program without activating the

DTS 96/24 decoder.

• Sampling frequencies higher than 48 kHz are sampled down to 48 kHz or lower and then sound field programs are applied.

y

You can select the desired sound field programs and setting the parameters by using GUI screen. See page 79 for details.

Front panel operations

Rotate the PROGRAM selector on the front panel.

The name of the selected sound field program appears in
the front panel display and in the short message display.

Remote control operations

Set the operation mode selector to AMP and then
press one of the sound field program selector
buttons on the remote control repeatedly.

The name of the selected sound field program appears in
the front panel display and in the short message display.

SOUND FIELD PROGRAMS

Selecting sound field programs

Notes

ON/OFF

MASTER

PURE DIRECT

VOLUME

MAIN ZONE

INPUT

ON

OFF

ENHANCER

NIGHT

ZONE ON/OFF

ZONE CONTROLS

MODE

TUNING

PRESET/TUNING

EDIT

MULTI ZONE

FM/AM

PRESET/
TUNING

MAN'L/AUTO FM

MEMORY

MIC

OPTIMIZER

EFFECT

STRAIGHT

CONTROL

SELECT

AUDIO

TONE

REC OUT/

ZONE2

A/B/C/D/E

PROGRAM

YPAO

ZONE 3

R

L

OPTICAL

USB

ZONE 2

AUDIO

VIDEO AUX

SILENT CINEMA

S VIDEO

VIDEO

PHONES

PROGRAM selector

VOLUME

CH

TV VOL

EFFECT

STRAIGHT

MEMORY

A/B/C/D/E

SRCH MODE

PURE DIRECT

PRESET/CH

SET MENU

BAND

LEVEL

ENHANCER

STEREO

SUR. DECODE

SELECT

EXTD SUR.

CLASSICAL

LIVE/CLUB

ENTERTAIN

MOVIE

NIGHT

MEMORY

1

2

TV

SOURCE

AMP

2

+

+

+

ENTER

DISPLAY

AUDIO

MENU

TITLE

TV MUTE

TV INPUT

MUTE

4

3

ENT

+

10

0

9

5

1

7

6

8

RETURN

AMP

Sound field program
selector buttons

Advertising