Procedure for tilting down, Manual tilt models), Operation – Yamaha F25 User Manual
Page 34
Operation
29
locked position. If the tilt support lever/bar
does not automatically lock, swing the motor
a little to the left and right.
EMU28032
Procedure for tilting down (manual tilt
models)
1.
Slightly tilt the outboard motor up.
2.
If equipped with the tilt support bar: Slow-
ly tilt the outboard motor down while pull-
ing the tilt support bar lever up.
3.
If equipped with the tilt support knob: Pull
the knob out, and then slowly tilt the out-
board motor down.
4.
If equipped with the tilt support lever:
Slowly tilt the outboard motor down while
pulling the tilt support lever up.
5.
Loosen the steering friction adjuster by
turning it counterclockwise, and adjust
the steering friction according to operator
preference.
WARNING
EWM00720
If there is too much resistance it could be
difficult to steer, which could result in an
accident.
U69M15E0.book Page 29 Wednesday, April 5, 2006 4:48 PM