Using the remote – X10 Wireless Technology IR34A User Manual

Page 10

Advertising
background image

18

19

Using The Remote

Assuming you followed the steps on the previous pages and
have set up some devices and some favorites, you can now use
the remote. See the sections that follow to set up more devices
and/or favorites, and to set up other functions. (See page 37 to
learn how to set up more favorites).

Using the Remote

Pressing either the HIS or HERS key
once at any time accesses the favorites that
you’ve set up. You can select any of your
favorites by pressing the button next to the
icon you want.

Pressing either the HIS or HERS key
a second time accesses the X10 Home
Automation modules that you’ve set up
for All Rooms. Use the Side Keys or the
Navigation Buttons to select the icon you want to control.

X10 RF Devices

Selecting X10 from the MODE key
screen displays the Pick Group screen.

• Press the side key for the room that

has the device that you want to control.
(For example, press the Side Key for
“Living Room.”) The screen shows
the device icons according to the way
“Living Room” was set up.

• Press the Side Key to send a command to the device. The

status of the device changes. You can see the status of the
device at the bottom of the screen; and the icon also changes
in appearance.

Extended Features

Any Side Key associated with an icon that has extended
features follow with additional screen(s) that can be used to
control the device. In addition, the Main Keys on the

IR34A

remote can be used to control X10 devices in unique ways.
This allows you to control those features.

Set the House Code to ‘B’ and the Unit
Code to ‘3.’ (In this example, B3 matches
the remote’s address for this device.)

Plug a lamp into the Lamp Module.

Plug the Lamp Module into a convenient
AC outlet.

Setting Up X10 Devices, cont.

Setting up an LM465 Lamp Module (example)

The following is a basic example of how to set up an X10
Lamp Module (sold separately). See X10’s Internet Home Page
for a complete catalogue of Home Automation Modules at
http://x10.com/homepage.htm.

Lamp Module

The Lamp Module may be used to control any incandescent
lamp rated up to 300W. It is not suitable for other types of lamps
such as fl uorescent, energy saving lamps, or lamps that include
a dimmer control.

Caution: Do not connect an appliance such as a coffee pot or
heater to the Lamp Module. It may damage the module and the
appliance and could cause a fi re hazard.

Advertising