X10 Wireless Technology IR34A - Manual (Page 22)

42 43
Advanced Settings
Press these keys using the following
sequence: HOME, Setup, More, and
Advanced.
The screen to the right lets you change
the backlight delay; enter codes for
devices directly from the printed code
list that came with the remote; set up
punchthrough for various devices; and
limit the channels that young children can
access.
Options
Select Options, then press a Side Key to
the left or the right of the option to adjust
the setting. Then press OK.
Backlight adjusts how long it takes before
the screen goes black (approx.. 2 to 120
seconds) if you don’t press any keys.
Key Transmit Time changes the delay between digits when
sending favorites, e.g., 1–6–2. This can be used in situations
where the channels are not accepted by the set-top box.
Device Codes
Select Device Codes, and then select a
device. Devices that have not yet been set
up are grayed out. You can select them
here and set them up by entering the device
code from the printed code list. Or, you
can change the code for a device that had
already been set up by simply entering the
new code.
This screen also lets you view the codes for any device that has
been set up. In the above example you can see the codes that
are set for TV, Cable, and SAT. We’ve selected CD and can
then enter its 4 digit code from the code list, using the number
keys on the remote. The above also shows that we’ve learned
codes under the AUX 1 key in DVD mode.
Setting up more, cont.
Clearing Settings in the Remote
This feature lets you clear (erase) various
things you’ve set up in the remote.
Press these keys using the following
sequence: HOME, Setup, More, and
Advanced. Then at the screen to the right
select Clear Settings.
Pressing the Side Key next to Devices
lets you clear the settings, i.e., codes for
various Devices (TV, VCR, etc.). After
selecting Devices, you select the device
you want to clear. Only devices that you
have set up are shown. All other devices
that have not been set up are grayed out.
Pressing the Side Key next to Favorites lets you select a group,
e.g., His, Hers, etc., and then clear ALL the favorites you had
set up in that group of favorites. Only groups that you have set
up favorites in are shown. All other groups are grayed out.
Pressing the Side Key next to Learned lets you select a device
(TV, VCR, etc.) that you had previously learned commands
and/or Macros under and clear everything that was learned.
Only devices that you have learned commands and/or Macros
under are shown. All other devices are grayed out.
Pressing the Side Key next to Punchthrough lets you clear any
Punchthrough commands you had set up for a device. Only
devices that you have set up Punchthrough for are shown. All
other devices are grayed out.
Pressing the Side Key next to Master Clear lets you clear
EVERYTHING in the remote. Be careful when selecting this.
Note however that ALL the sections above display a warning
screen allowing you to change your mind before actually
clearing anything.