Zebra ZM400 - Manual (Page 45)

37 Operations
Load Media
3/27/07 ZM400/ZM600 User Guide 79695L-001 Rev. A
Additional Steps for Peel-Off Mode (with or without Liner Take-Up)
After completing Beginning Steps for all Print Modes and Printer Options on page 33 ,
continue with this section to operate the printer in Peel-Off mode with or without liner take-up.
Your printer must have the Peel option, the Liner Take-Up option, or the Rewind option
installed. See
Print Modes and Printer Options on page 30 for more information.
For additional procedures related to the rewind option, see Routine Maintenance for the
Rewind Option on page 96 .
To operate the printer in Peel-Off mode, complete these steps:
1. Extend the media approximately 18 in. (500 mm) out of the printer.
2. Remove the exposed labels so that only the liner remains.