Remove used ribbon – Zebra ZM400 User Manual

Page 59

Advertising
background image

51

Operations

Load Ribbon

3/27/07

ZM400/ZM600 User Guide

79695L-001 Rev. A

Remove Used Ribbon

To remove used ribbon, complete these steps:

1.

2.

To loosen the ribbon, squeeze it against the ribbon take-up spindle tension blades (

1

). At

the same time, turn the ribbon take-up spindle release knob counterclockwise (

2

).

The tension blades collapse into the ribbon take-up spindle, loosening the ribbon.

3.

Slide the used ribbon off of the ribbon take-up spindle and discard.

Caution • Do not cut the ribbon directly on the ribbon take-up spindle. Doing so may
damage the spindle.

If the ribbon has not run out, cut or break it before the ribbon take-up spindle (

1

).

1

1

2

Advertising
This manual is related to the following products: