Yamaha YW50T - Manual (Page 32)

4-2
PRE-OPERATION CHECKS
NOTE:
Pre-operation checks should be made each time the scooter is used. Such an inspection can be accomplished in a
very short time; and the added safety it assures is more than worth the time involved.
EWA00033
w
If any item in the Pre-operation check list is not working properly, have it inspected and repaired before operating
the scooter.
4
CHECKS
9 Check for damage.
9 Check tire condition and tread depth
9 Check air pressure.
9 Correct if necessary.
9 Make sure that operation is smooth.
9 Lubricate lever pivoting points if necessary.
9 Make sure that operation is smooth.
9 Lubricate pivot if necessary.
9 Make sure that all nuts, bolts and screws are properly tightened.
9 Tighten if necessary.
9 Check operation.
9 Correct if necessary.
ITEM
Wheel and tires
Brake levers
Centerstand
Chassis fasteners
Instruments, light, signals
and switches
PAGE
6-11~6-13
3-5,6-14,6-17
6-18
-
3-1~3-5
5PJ-F8199-13.pm65 5/25/2004, 5:31 PM 31