10 english, Fcc information (for us customers) – Yamaha PJP-25UR User Manual

Page 12

Advertising
background image

10 English

COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party: Yamaha Electronics Corporation,

U.S.A.

Address: 6660 Orangethorpe Avenue Buena Park,

California 90620

Telephone: (714)522-9105
Hours of operation: Monday through Friday

8 a.m. - 4 p.m. PST.

Type of Equipment: Conference Microphone Speaker
Model Name: PJP-25UR

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received
including interfernce that may cause undesired operation.
See user manual instructions if interference to radio
reception is suspected.

This device complies with the requirements listed in FCC
regulations, Part 15 for Class “B” digital devices. If you
are using a cardiac pacemaker, please note that this device
can radiate radio frequency energy in the area near the
product.

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC,
to use the product.

2 IMPORTANT: When connecting this product to

accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.

3 NOTE: This product has been tested and found to

comply with the requirements listed in FCC
Regulations, Part 15 for Class “B” digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and,
if not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If
this product is found to be the source of interference,
which can be determined by turning the unit “OFF”
and “ON”, please try to eliminate the problem by
using one of the following measures;

Relocate either the product generating the interference
or the device that is being affected by the interference.

Utilize power outlets that are on different branch
(circuit breaker of fuse) circuits or install AC line
filter/s.

In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is 300 ohm
ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce
satisfactory results, please contact your local retailer
authorized to distribute this type of product. If you can
not locate the appropriate retailer, please contact
Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe
Ave, Buena Park, CA 90620.

The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.

Advertising