Yamaha MT120 - Manual (Page 28)

SPEClFlCATlONS
TAPE TRANSPORT
Tape Type Chrome (70 microsec. EQ)
Heads 4-channel Permalloy rec/play head
4-channel ferrite erase head
Tape Speed 4.8 cm/sec., 9.5 cm/sec.
Pitch Control Approx. ± 10%
Wow & Flutter Less than 0.12% WRMS
Rewind Time Approx. 110 sec., for C-60 tape
Motor DC servo motor
CONNECTORS
Input 1 — 4 10k-ohms
AUX RETURN L & R
Input Impedance
Rated Input Level
Max. Input Level
Min. Input Level
Input Impedance
Rated Input Level
Min. Input Level
Output Impedance
Load Impedance
Rated Output Level
Load Impedance
Max. Output Level
Output Impedance
Load Impedance
Rated Output Level
Output Impedance
Load Impedance
Rated Output Level
Output Impedance
Load Impedance
Rated Output Level
-10 dB to -50 dB (fader nominal)
+ 10 dB (gain control min.)
-56 dB (gain control, fader max.)
10k-ohms
STEREO OUT L & R
PHONES
TAPE OUT 1 — 4
AUX SEND
MONITOR OUT L & R
-10 dB (AUX RETURN level control nominal)
-16 dB (AUX RETURN level control max.)
1 k-ohm
Greater than 10 k-ohms
-10 dB into 50 k-ohms
8 to 40 ohms
45 mW + 45 mW/40 ohms
1 k-ohm
Greater than 10 k-ohms
-10 dB into 50 k-ohms
1 k-ohm
Greater than 10 k-ohms
-10 dB into 50 k-ohms
1 k-ohm
Greater than 10 k-ohms
-10 dB into 50 k-ohms
ELECTRICAL SPECIFICATIONS
Frequency Response (NR OUT)
S/N ratio (3% THD Level)
Distortion
Channel Separation
Erasure Ratio
Noise Reduction
Graphic Equalizer
40 Hz to 18 kHz, ±3 dB at 9.5 cm/sec.
40 Hz to 13 kHz, ±3 dB at 4.8 cm/sec.
85 dB, dbx ON, IHF-A
1.0% at 315 Hz, dbx ON, -13 dB Rec. Level
Greater than 65 dB at 1 kHz, dbx ON, (B.P.F)
Greater than 70 dB at 1 kHz, dbx ON
dbx *
100, 400, 1k, 5k, 10kHz (± 10 dB), Q = 0.7
GENERAL
Power Requirements U.S. & Canadian Models: 120 V AC, 60 Hz
UK Model: 240 VAC, 50 Hz
General Model: 230 V AC, 50 Hz
Power Consumption 16 W
Dimensions (WxHxD) 410 x 80.8 x 237 mm (16-1/8" x 3-3/16" x 9-5/16")
Weight 2.6 kg (5 Ibs 12 oz)
dbx is a trademark of dbx Incorporated.
0 dB = 0.775 Vr.m.s.
All specifications subject to change without notice.
25