Yamaha F10 - Manual (Page 46)

F11/F01 Owner’s Manual
46
ENGLISH
Internet Direct Connection (IDC) (F11)
CAUTION
To cancel loading, press any button (except the [PLAY/STOP] button) before
pressing the [PLAY/STOP] button in step 2.
2
Start loading.
Press the [PLAY/STOP] button.
When loading from the USB flash memory device
is completed, an “End” message will appear on
the display. Press any button to exit from this dis-
play.
Once loading is completed, you are now ready to access the Internet.
Once the instrument is successfully connected to the Internet, the channel
streamed from the Internet will be shown on the display when you select
[INTERNET] lamp with the [BGM] button.
For instructions on streaming, see “Listening to the Songs on Internet (F11)” on
page 27.
Checking the field strength (when using a USB wire-
less LAN adaptor)
You can check the field strength on the display, if you are using a USB wireless LAN
adaptor (Connection example 4 on page 43).
While holding down the [BGM] button, press the [VARIATION] button.
The field strength indication will appear on the display for about three seconds.
Field Strength Indications
NOTE
If loading is not successfully
completed, an “Err” message
and the error code will appear
alternately on the display.
NOTE
Error Code
You can check the description
for the error code on the
Yamaha website:
http://music.yamaha.com/idc
NOTE
Yamaha recommends that you
back up the Internet setting files
(page 55).
NOTE
The field strength can be dis-
played after making the Inter-
net connection.
NOTE
If you are using a wireless
game adaptor, the display pat-
tern for “No wireless LAN is
used” will appear.
Radio Status Display
No signal is present.
Field strength: Weak
Field strength: Medium
Field strength: Strong
No wireless LAN is used.