Yamaha F10 - Manual (Page 57)

ENGLISH
Data Backup (F01)
F11/F01 Owner’s Manual
57
Data Backup (F01)
Backup Data in Internal Memory
The following data will be saved to internal memory of the instrument. The data is maintained even when the power is
turned off.
• Metronome Volume/Time Signature
• Fine Tuning of the Pitch
• Character Code
Initializing the data
Turn off the power to the instrument. Then turn the power on while holding the C7 key.
Backing Up Data to a Computer
In order to back up data from the instrument to a computer, you must first download
Musicsoft Downloader from the Yamaha website (below), and install it on your com-
puter.
http://music.yamaha.com/download/
System requirement for Musicsoft Downloader
For maximum data security Yamaha recommends that you use Musicsoft Downloader
to save your important data to a computer. This important data includes backup data
in internal memory of the instrument (page 55) and the recorded performance
(page 38). For information on saving backup data from the instrument to a computer,
refer to “Transferring Data Between the Computer and Instrument (for unprotected
data)” in the Help file that came with Musicsoft Downloader.
Restoring the Backup Data
The backup data "F01.bup" on a computer can be restored to the instrument. For
information on loading song data from a computer to this instrument, refer to “Trans-
ferring Data Between the Computer and Instrument (for unprotected data)” in the
Help file that came with Musicsoft Downloader.
C7
NOTE
You can download Musicsoft
Downloader without charge
from the Yamaha website.
CAUTION
Do not turn off the power to
the instrument or unplug
the instrument during data
transmission. Otherwise, the
data will not be saved. Fur-
thermore, USB flash mem-
ory operation may become
unstable, causing the entire
memory to be erased when
you turn the power to the
instrument on or off.
NOTE
Before you use this instrument,
close the Musicsoft Downloader
window and quit the application.
NOTE
The backup data file is automat-
ically named "F01.bup."
• OS : Windows
®
98SE/Me/2000/XP/Vista
• CPU : Intel
®
Pentium
®
or Celeron
®
chip of 233MHz or higher (500MHz or
higher recommended)
• Memory : 64MB or higher (256MB or higher recommended)
• Available hard disk capacity: 128MB or higher (512MB or higher recommended)
• Display : 800
× 600 High Color (16-bit)
• Others : Microsoft
®
Internet Explorer
®
version 5.5 or higher