Yamaha PJP-100H User Manual

Page 15

Advertising
background image

Preparation Procedure

11

PRE

P

ARA

T

ION

English

Assigning the IP address manually

Follow the procedure below to register the network
information manually.

Before setting the network information, check that this unit is
connected properly to the network. If the disconnected icon
(page 10) is displayed on the top right of the display, check the
LAN cable connection and the condition of the network to which
the LAN cable is connected.

y

The factory settings of the network information are as follows.

IP address: 192.168.100.200

Subnet mask: 255.255.255.0

Default gateway: 0.0.0.0

1

Press

repeatedly until the initial display

appears.
“???.???.???.???” is displayed when the DHCP server
does not exist in the network, and the IP address
obtained from the DHCP server is displayed when it
exists.

2

Press .
The menu screen appears.

3

Press

or

to select “1. Settings”, and

then press

.

The “Settings” menu appears.

4

Press

or

to select “1. Network Settings”,

and then press

.

The “Network Settings” menu appears.

Note

1

2

3

4

5

6

7

8

9

0

MIC MUTE

LAN

VOL

DC IN 12V

IN AUDIO OUT

/

/

Numeric keys

Menu

:Address

IP: ???.???.???.???

3. Online

2. Call History

1. Settings

Menu

3. General Settings

2. Sound Settings

1. Network Settings

Settings

3. Default Gateway

2. Subnet Mask

1. IP Address

Network Settings

01EN_00_PJP-100H_UCGB.book Page 11 Wednesday, August 23, 2006 3:04 PM

Advertising