Yamaha PJP-100H - Manual (Page 16)

Preparation Procedure
12
5
Press or to select “5. DHCP”, and then
press .
The “DHCP” menu appears.
6
Press or to select “2. Disable”, and then
press .
The “Network Settings” menu reappears.
7
Press or to select “1. IP Address”, and
then press .
The “IP Address” menu appears.
8
Use the numeric keys to enter the IP address
of this unit, and then press
.
The entered IP address is registered and the “Network
Settings” menu reappears.
9
Press or to select “2. Subnet Mask”, and
then press .
The “Subnet Mask” menu appears.
10
Use the numeric keys to enter the subnet
mask of this unit, and then press
.
The entered subnet mask is registered and the
“Network Settings” menu reappears.
2. Disable
1. Enable
DHCP
3. Default Gateway
2. Subnet Mask
1. IP Address
Network Settings
(192.168.100.200)
[ ] [#]
192.168.100.200
IP Adress
^
3. Default Gateway
2. Subnet Mask
1. IP Address
Network Settings
(255.255.255.000)
[ ] [#]
255.255.255.000
^
Subnet Mask
3. Default Gateway
2. Subnet Mask
1. IP Address
Network Settings
01EN_00_PJP-100H_UCGB.book Page 12 Wednesday, August 23, 2006 3:04 PM