Yamaha PJP-100H - Manual (Page 6)

FEATURES
2
This unit is an IP audio conference system that enables simultaneous talk between multiple locations (up to 4 locations
for the mesh connection and up to 8 locations for the cascade connection) through networks including the Internet and
corporate LAN.
Audio conference through networks
Audio conference can be held by connecting up to 4 locations for the mesh connection and up to 8 locations for the
cascade connection through networks including the Internet and corporate LAN. The audio control employs digital signal
processing so the participants can concentrate on talk without feeling the stress of delay or interruption of words.
Arrayed microphones and speakers for high audio quality
Depending on the using environment, the microphones can control the audio pickup area so that the clear conversation is
assured. Also, the directivity of the speakers is controlled so that clear audio can be transmitted to the participants sitting
in the optimum area even when the volume level is low.
Divide speaker mode for assigning a speaker output position to each talking location
When an audio conference involves more than two locations, the position from which the audio from a location is output
can be assigned per location (Divide function). With previous audio conference systems, the distinction of the talker has
been difficult because the audio from different locations have been mixed. This divide function makes it easy to
distinguish the location of each talker and also improves the feeling of presence of the conference.
Settings from the PC
The [Web Settings Page] incorporated in this unit can be set from a PC without difficulty. The PC settings are convenient
for editing the address book.
Features
Headquarter Branch B
Branch A Branch C
Internet,
Corporate LAN, etc.
01EN_00_PJP-100H_UCGB.book Page 2 Wednesday, August 23, 2006 3:04 PM