Zanussi ZWD 1270 S - Manual (Page 12)

12
6. Select the temperature
Press the “Temperature” button if you wish to select a
temperature value different from the one proposed by
the machine.
The relevant light will light up.
7. Select the spin speed or the
Rinse Hold option
Press the “Spin Speed” button repeatedly, in order to
select the desired spin speed or the “Rinse Hold” option.
The relevant light will light up.
If you select the “Rinse Hold” option, the machine will
stop at the end of the programme with the water still in
the tub.
8. Select the desired options
If your laundry is very dirty, it may be advisable to
select the “Prewash” option.
If your laundry is lightly or normally soiled and it is
necessary to prolong the washing time, select the
“40° AA” option.
If your laundry is only slightly soiled, select the “Extra
Quick” option.
The relevant light illuminates.
Prewash
Extra Quick
Options
40° AA
900
1200
700
500
Rinse Hold
Spin Speed
Temperature
60°C
50°C
95°C
40°C
30°C
9. Select the “Delay”
Before you start the programme, if you wish the
start to be delayed, press the “Delay” button
repeatedly, or keep it pressed, to select the desired delay.
The selected delay time value (up to 24 hours) will
appear on the display for 3 seconds, then the duration of
the programme will appear again.
10. Start the programme
Press the “Start/Pause” button. The relevant light will
stop flashing and only the light relevant to the phase that
is in progress will remain lit.
If you have chosen a delayed start, the washing machine
will begin the countdown.
The display will show the duration of the programme or
the selected delay.
Start/Pause
Delay