Zanussi ZWD 1270 S - Manual (Page 4)

4
Your New Washer-Dryer
This new machine meets all modern requirements for effective treatment of laundry with low
water, energy and detergent consumption.
●
The special wool programme with its new delicate
wash system treats your woollens with extreme care.
●
The balance control device ensures that the
machine remains stable when spinning.
●
Automatic cooling of the wash water to 60°C
before draining, with the 95°C programme. This
reduces thermal shock to fabrics, helping to prevent
creasing.
●
The ECO valve allows total use of detergent and
reduces water consumption so saving energy.
●
The two drying programmes will give your wash
that soft, relaxed feel whatever the weather.
Ecological hints
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
●
Adjust the quantity of detergent according to the
hardness of your water supply, the amount of
laundry and the degree of soiling.
●
Select the “Extra Quick” programme for lightly
soiled laundry.
●
A programme without prewash is sufficient for
normally soiled laundry.
●
Try to load the maximum drying capacity of the
machine as small loads are uneconomical.
●
Always load well spun laundry. The higher the spin
speed, the lower the electricity consumption and the
shorter the drying times.
In the interest
of the environment
●
Materials marked with the symbol are
recyclable.
●
Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.
●
When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.
●
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
How do we help to protect the environment?
We use recycled paper!
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the
wash load manually and select a spin programme. For more detailed information see the section headed "Something
Not Working".