Yamaha Digital Sound Projector YSP-1000 - Manual (Page 28)

USING SET MENU
26
This section simply describes how to display the OSD (on-
screen display) of this unit on your TV screen and set the
parameters for your listening room. Once this is complete,
you can enjoy real surround sound while watching TV in
the comfort of your own home.
The OSD is not output at the COMPONENT VIDEO OUT
jacks of this unit. Connect the VIDEO OUT jack of this unit to
the video input jacks of your TV to display the OSD.
1
Check that the video input jack on your TV is
connected to the VIDEO OUT jacks of this
unit to display the OSD of this unit.
2
Press STANDBY/ON on the front panel or on
the remote control to turn on the power of
this unit.
3
Turn on the power of your TV.
4 Press TV on the remote control to display the
OSD of this unit on your TV screen.
It may take a few seconds before this unit’s OSD
appears on your TV screen.
If the OSD does not appear, use the remote control
provided with your TV to switch the video input until
the OSD appears.
■ Other buttons that display the OSD
USING SET MENU
Displaying the OSD
Note
STANDBY/ON
or
Front panel Remote control
TV
OSD screen example
TV
AUTO:ANALOG
Remote control buttons that
display the OSD
Page
1 Input selector buttons 39
2 TruBass 58
3 Beam mode buttons 42
4 Sound field program buttons 51
5 CH LEVEL 84
6 VOLUME +/– 40
7 MUTE 41
8 INPUTMODE 86
9 SLEEP 60
0 VOL MODE 56
A SURROUND 46
B MENU 31, 62, 69
TV
2 1
STEREO
SLEEP
CH LEVEL MENU
RETURN TEST
TV VOL VOLUME
MUTE TV INPUT TV MUTE
ENTER
SURROUND OFF
CODE SET
SPORTS
3
4 5 6
7 8 9
0 +10
5BEAM ST+3BEAM 3BEAM
TARGET
MUSIC MOVIE VOL MODE
INPUTMODE
MACRO INPUT2 INPUT1
TV STB VCR DVD
AUX
YSP
CINEMA DSP
CH
1
3
5
6
7
9
0
A
B
2
8
4
TV