Yamaha Digital Sound Projector YSP-1000 - Manual (Page 57)

55
USING SOUND FIELD PROGRAMS
BA
S
IC
OP
ERA
T
IO
N
English
Turn off the CINEMA DSP programs if you want to enjoy
the original sound without the sound field program effect.
1
Press YSP on the remote control to switch to
the operation mode of this unit.
2
Press OFF on the remote control to turn off
the sound field programs.
You can enjoy good quality sound with the factory preset
parameters. However, you can also adjust the effect level
of the CINEMA DSP programs relative to the level of the
direct sound so that each sound field program can reflect
your listening environment and your preference even more
accurately.
1
Press YSP on the remote control to switch to
the operation mode of this unit.
2
Press MUSIC, MOVIE or SPORTS on the
remote control to select the desired sound
field program.
3
Press / on the remote control.
DSP LEVEL is shown in the front panel display.
4
Press / on the remote control to adjust
the effect level of the CINEMA DSP programs.
Control range: –6 dB to +3 dB
• A larger value increases the effect level.
• A smaller value decreases the effect level.
Turning off CINEMA DSP programs
YSP
+10
OFF
Adjusting CINEMA DSP levels
YSP
0
SPORTS
8
MOVIE
7
MUSIC
or or
VOL
ENTER